Chevrons

I made a chevron cushion panel as a trial a few weeks ago and totally fell in love with it.

But, what I really wanted to make was a chevron quilt and today I finally made a start.

The new Mod Century fabrics were waiting to be used, so luckily the plan was already in place. 

Mod Centry designs remind me of what turned out to be our very Scandi cool kitchen when I was growing up.

And text fabrics were an easy choice for the background, as they worked so well in the cushion.

T x

 

 

EPP & hexagons

Do you love hexagons and English Paper Piecing (EPP)?
 

I sure do and above that I love hand stitching. But, I am not fond of the preparation e.g cutting loads of papers very accurately, basting the fabric around the papers, then removing the said papers etc.etc. Hence, I decided to try a glue method for English paperless piecing.

Glad to report that it worked very well! I used it succesfully in this cushion project!
 

 Here's a quick tutorial on the paperless method:

In addition to your fabric, all you need is one paper template of each chosen shape in the finished size (this project had several shapes, but it could be just one hexie), an air erasable disappearing marker or a pencil and a Sewline fabric glue stick!

 

Take a fabric and put the paper template on the right side.
With the disappearing marker, draw the paper outline on the right side of the fabric. 
Cut the fabric adding your desired seam allowance (I used the usual 1/4", but it's not really so exact. As long as the s.a. is there-abouts it's fine).
 

Turn over to the wrong side and apply fabric glue to the edges.

Turn over to the right side and fold over the seam allowances exactly along the marked lines and finger press down to stick.
 

 

  Repeat with all the shapes and you are ready to stitch!
Stitch with a whip stitch close to the edge with right sides together.
As you can see in the picture, I use batting/wadding to lay out the prepared fabric shapes, so that I can easily move it if necessary and the fabric pieces stay well in place as well.

Please note: Leave any outer edges unfolded, as these are the seam allowances of the finished top – the seam allowance is needed when the top is stitched to the border or to a backing.

The pattern for this actual cushion can be bought at Tikki.

Quilters Grid by Vielene

 

After I posted the aqua scrap cushion project, I had quite a few questions about Quilters Grid.  I always keep some of it in my stash.  It's a fusible fine vilene stabilizer with an one inch square grid printed onto it.  It's great for patchwork projects where you want a little bit more stabilizing support like bags, cushions and such projects. The finished patchwork is in my humble opinion very hard work to hand quilt, hence I would only plan a machine quilting project if I intend to use it.  But it is fabulous in accuracy and speed!  In the UK you can get it here!



 

This is what the grid looks like.

 

TUTORIAL:

Cut the fabrics to the same size "full" squares, by which I mean that they can't be halves like 2.5". 

They must be 1", 2", 3" or larger and they must all be the same size.

In this example we cut 2" squares and the grid was 24" by 24" = finished size 18" square cushion.

(=as all those 2" squares finish at 1.5" each times 12  is 18", so we need 12 x 2 " = 24"square grid)

Note: Ideally the squares should be just (like an 1/8" or 1/16") under the required size, so that the fabrics don't overlap the grid.

Lay the grid with the fusible side up on a light background which could be a towel or an old tablecloth.  You also need to be working on a surface you can iron on.  I used a foot stool as I was watching a movie at the same time - multi tasking....

Lay the squares in a pleasing order and press them down with a hot iron (mine was on the hottest setting).

 

Stitch all horizontal seams with a 1/4" seam allowance. Press the seams to one side or cut them open and press the seams open as I did. Remember to reduce the heat when pressing on the vilene, so that it doesn't scorch.

Stitch all vertical seams with a 1/4" seam allowance. Press as before. Congratularions - it's ready!

It's was easy and quick - the only hassle is pressing those seam allowances open, but once that's done, the result is really amazing.

Here is the wrong side
 

Check out those matching corners - they happened by magic!

Good luck with your Quilters Grid ventures.

Tx

Summer stamp quilt

 

This post comes a little late, but I wanted to share a quilt I made for my 9 year old daughter this summer when she went to a residential camp. This was great fun making and most of the blocks have some special messages stamped onto them.  My daughter would only use a quilt if it has fleece on the back - shock horror!  But I must agree with her that they sure are very cuddly and cozy.




This was the first time I made a scrappy binding although I have been quilting since the 90's!  I love it in this project - it turned out just like I wanted it!

I love scraps!

My dear Flickr friend Mel from the States sent me these lovely fabric scraps in mostly aqua colours - left overs from her seriously large stash!

 I love them and especially so the ones in the foreground, so I couldn't wait to start a project...why is that someone else's scraps always look better than your own?

Thank you Mel.

I wanted a really scrappy look for this project, so had a quick rummage through my own scraps and found the necessary missing pieces. The Accuquilt Go cutter had to be dusted down, but soon she was ready and using the 6 x 2" die I soon  had 144 yummy squares. Looking at the pile made me quickly decide to use a sheet of Vilene Quilters Grid to make the job easier and not to mention faster.

 

Here they are all 144 sqs ironed onto the grid.

 

And finally pieced, 18" sq.                           (Can't get this pic to re-size!!!)